About the company.
Joint-stock company “South Ural plant” Crystal “produces quartz crystals, reproducing in industrial autoclaves the sacrament that occurred many years ago in nature. Repeating the nature of the crystallization of crystal, the plant carefully preserves the best qualities of quartz, its piezoelectric properties and beauty. The development of the technology of the use of piezoelectrics constantly imposes ever higher demands on the perfection of the structure of artificial crystals, preserving the stability of their properties. This requires enterprise specialists to look for ways to improve production technology on a daily basis, to be ready for new requests from customers.
Technical Specification for Synthetic Piezoelectric Quartz Crystals.
All tests of quartz quality are made according to IEC 60758(2016) Standard.
1. Modification: Right-Hand (RH).
2. Q-value Q≥1,8х106
Technical Specification for One-side Synthetic Quartz Crystals.
All tests of quartz quality are made according to IEC 60758(2016) Standard
1. Product name: One-side Synthetic Quartz Crystals.
2. Modification: Right-Hand (RH).
3. Q-value Q≥1,8х106
Technical specification for colored quartz.
Specification for lumbered bars.
All quality tests of quartz from which the lumbered bars are produced are made according to IEC 60758(2016) Standard.
1. Modification: Right-Hand.
2. Q-value Q >= 1,8 x106
On the availability of high-quality synthetic piezoquartz in Russia S.N.Abdrafikov on the example of JSC Yuzhnouralsk Plant “Kristall “.
Import substitution is not only a buzzword, but also an important event in the creation of electronic devices from the Russian element base. Twenty years ago, one hundred percent of piezoquartz crystals and crystals for glass melting were in demand by domestic manufacturers of quartz resonators, quartz oscillators and quartz filters. The situation has changed dramatically with the opening of foreign markets, especially the Chinese one. The proposals of Chinese manufacturers of electronic equipment at that time were economically very attractive. But our country should have its own electronics, especially the elemental base of piezoquartz. First of all, because the largest plant in terms of volume of autoclaves for production of synthetic piezoquartz crystals is located in Russia. So far, the Kristall plant has a share of purchases of piezoquartz by Russian buyers less than 5%. In recent years, when manufacturers of piezoelements reduced production, little updated the product range, the Kristall plant not only retained production facilities and production technology, but improved it, ensuring compliance with its products to the best foreign analogues. Many technical and organizational decisions had to be introduced in order to compete with manufacturers of quartz from the USA, Japan and China.